Smart Wi-Fi White Double Power Point Sockets

Controls 240V Appliances from your smartphone or tablet

SKU: PS2200

RRP $99.00
In Stock

Buy In Bulk & Save!
Buy 4 to 10: Pay $56.95 ea
Buy 11 to 20: Pay $54.10 ea
Buy 21 to 100: Pay $51.39 ea

Smart Wi-Fi White Double Power Point Sockets

Controls 240V Appliances from your smartphone or tablet 

Automate your home with our Smart Wifi controlled Double Power Point Outlets. These Smart Wi-Fi Double GPO's connects to your Wi-fi network in your home or office and can be controlled via an APP or through voice control via Google Home and Alexa.  

Each sockets can be controlled individually and you are able to monitor how much power your appliances are using. Provides real time feedback as to the On and Off state of your appliances and can be controlled with smart timer function and Scene Mode; where you can customise your desired settings.


- Remotely controls your appliances via Wi-Fi or 3G/4G 

- Works with iOS or Android via APP

- Compatible with Smart Home, Tuya Alexa, Google Home and IFTTT APP

- High Quality Tempered Glass Panel Design

- LED Switch backlight

- Real Time Status Display on APP

- Timer and Scene Mode conrtol

- Power Monitoring

- Capacitive Touch switches

- Overload and Overheat Protection


  • SAA Certification: GMA-504470-EA
  • Protocol: 802.11 g
  • Frequency: WIFI 2.4GHz, WPA/WPA
  • Dimension: 120*72*42mm
  • Voltage 110-240V AC / 50Hz~60Hz
  • Rated load: 15Amp
  • Mechanical Life: 100000 Times
SKU PS2200
Barcode # 9351634014842
Shipping Weight 0.3000kg
Shipping Width 0.250m
Shipping Height 0.050m
Shipping Length 0.150m
Shipping Cubic 0.001875000m3
Unit Of Measure ea

Great Product

By: on 22 May 2020
Product took a while to configure. For starters the QR barcode in the manual tries to load an APK in android which is not allowed on most phones. You need to go to the play store and download the Smart Life manual. Same goes for apple products. Then to get the unit into the correct mode you need to do the following. 1. Hold down power for 5 secs until the light flash (somewhat fast). Then do this AGAIN and the lights will then flash slowly only then can you see the WIFI AP it creates. The manual does not mention this at all - it says to only do it once. Besides that the software is decent with timers and schedules as well as power usage. Connected to my Google home with no issues and easy to control. I have it set up for a heated towel rail in the bathroom. It will turn on as a schedule or manually. Either way I have been able to set it to deactivate 1 hour after it comes on. Perfect solution and far cheaper than other timer points on the marker.

Write a product review

You May Also Like

Others Also Bought

More From This Category