C-GEL™ Ethyl Cyanoacrylate Gel 50grams

Extremely thick Cyanoacrylate Gel 

IC-GEL™ is a cyanoacrylate paste that is extremely thick which comes in an applicator tube like toothpaste. It has the same bonding and curing time characteristics as MAXI-CURE™. IC-GEL™, however, can be applied to a vertical surface and will stay in place. It will not run. This can be very convenient for some assembly applications. Applying CA to the bottom of a horizontal surface, such as a ceiling, can be very difficult with anything other than a full standard CA bottle. IC-GEL™ can be applied at any angle with just a squeeze of the tube. The gel does, however, have a tendency to continue to come out of the tube for about a second after pressure is released, so this must be taken into account to apply the exact amount of IC-GEL™ that you want.

IC-GEL™ is an excellent putty for plastic models. It will fill any void and can be formed to many shapes. Applying INSTA-SET™ allows IC-GEL™ to be sanded or filed to final shape in less than 20 seconds. Autobody repairmen have finished their jobs in a fraction of the time by using IC-GEL™ with the additional advantage over normal body putties of superior bonding to metal surfaces.

IC-GEL's™ most popular application is for the bonding of fragments of live coral (frags) to underwater rocks in aquariums. It has proven to be non-toxic to aquatic organisms and provides instant bonding for the propagation of the coral. IC-Gel has a superior shelf life of over three years and its application nozzle makes it the easiest of all CAs to apply.

Works Best On:

• Water-Resistant
• Reinforcing

Works Good On:

• Balsa Wood
• Soft Wood
• Hard Wood
• Glass & Metal
• Fiberglass
• Ceramics
• Hard Plastics
• Rubber

Screw on top and cap unit to puncture seal on the tube. Remove cap and apply IC-GEL to one surface, and then hold parts tightly together. Sets in 10-25 seconds. Replace cap immediately after use. Store in cool dry place.