Hevy Duty Wireless IP69 Reversing Camera with 7" Wireless LCD Display

Easy to install Wireless Camera and LCD Display

• COMMERCIAL GRADE DASH MOUNT MONITOR SYSTEM

   

  Wireless monitor to camera kit features a 7" 450cd heavy duty display monitor with built-in wireless receiver with a heavy duty camera and built-in wireless transmitter. The wireless system means there is no need to run a video cable from the monitor to the camera, which makes installation suitable for larger vehicles and trailers, etc.
   

• Provides unobstructed rear view of the vehicle for safer reversing and peace of mind
• 7" commercial grade display with built in wireless receiver
• Commercial grade reverse camera with 18 IR LEDs for night vision and built in wireless transmitter and external antenna
• Triple video camera input-enabled allowing additional cameras to be added to the system, two wireless and one wired
• Rated IP69K dust and waterproof camera that withstands harsh environment condition
• High/low voltage cut off and built in circuit protection
• 12 & 24V Compatible suitable for commercial vehicles, 4WDs and cars
• Optional Windscreen Suction Mount Available (GTSM1)
• Easy wireless transmission installation for DIY enthusiasts, simply power the camera and monitor, no need to run video cable
• Monitor specifications 
   
  Monitor size: 7.0" 
  Mounting type: Adjustable metal bracket & windscreen suction mount (gtsm1 sold separately) 
  Resolution / Brightness: 800(H) x 450(V) / 450 candela 
  AHD: No 
  Input voltage: 12V/24V 
  Video inputs: 3 (2 wirelesss + 1 Prolink II) 
  Display configuration (single, dual or quad): Single 
  Image flip: Yes 
  Display image adjustment: 
  Brightness: Yes 
  Contrast: Yes 
  Saturation: Yes 
  Reverse (mirror) image: Yes 
  Pal or NTSC: Pal/NTSC 
  Connection type: wireless and prolink ii 
  Dimensions (monitor only): 129mm(h) x 195mm(w) x 30mm(d) 
  Dimensions (monitor & bracket): 156mm(h) x 215mm(w) x 73mm(d) [with bracket in vertical position & sunshade fitted without the antenna] 
   
  Camera specifications 
   
  Mount type: Surface mount u-shaped 
  Camera type (reverse or rearview): Rear 
  AHD / Resolution: No / N/A 
  Camera angle: 120 degree 
  Image sensor (CMOS or CCD): CMOS 
  Parking gridlines: No 
  Pal or NTSC: NTSC 
  IP rating: IP69K 
  Input voltage: 12V 
  Minimum illumination: 0 lux 
  Number of LEDs: 18 
  Led type: Infrared 
  Plug type camera end: Prolink II 
  Plug type monitor end: N/A 
  Video cable length: 400mm 
  Reverse trigger on video cable: N/A 
  Dimensions (camera only): 43mm(h) x 70mm(w) x 58mm(l) 
  Dimensions (camera & bracket): 80mm(h) x 78mm(w) x 58mm(l) 
  Antenna height: 111mm (max); 87mm (when at 90 degree angle)