Xerun G3 V10 3.5T Brushless Motor

Precision Power for Elite-Level RC Racing

The Hobbywing XeRun V10 G3 is engineered for one thing: top-tier competitive racing. Whether you’re battling for podiums at IFMAR events or pushing the limits at local club races, the V10 G3 delivers refined performance, improved cooling, and race-ready durability.

With enhanced KV, torque, weight reduction, and smarter cooling, the G3 series marks a major upgrade over the previous G2 generation.

---

Next-Level Performance Enhancements

• +16% Higher KV and +4% Torque Gain
  Compared to the V10 G2 Stock motors, the G3 delivers faster response and increased speed across all conditions.

• RPM Significantly Increased
  The optimized rotor and stator design unlock greater peak RPM for both Stock and Modified variants.

• Lighter & Faster

  • Stock Motors (132g): 21% lighter than G2

  • Modified Motors (161g): 11% lighter than G2
    Lower mass improves chassis balance, acceleration, and efficiency.

---

Precision Control at Every Turn

• Built-in High-Precision Hall Sensor
  Ensures ultra-smooth throttle response and perfect linearity under all load conditions.

• Balanced Rotor & Timing Stability
  Precision-balanced rotor + clearly marked rear timing plate = stable and reliable mechanical timing adjustments.

• Adjustable Timing Range

  • Stock Motors (10.5T–25.5T): 30°–60°

  • Modified Motors (3.5T–8.5T): 20°–50°
    Fine-tune your motor’s power delivery to suit your track, gearing, and driving style.

---

Smart Cooling for Hard Racing

• Optimized Can Design
  Improved airflow around the stator core keeps temperatures low during intense runs.

• Targeted End Plate Machining

  • Stock Motors (10.5T–21.5T): Extra machining for better heat dissipation.

  • Modified Motors (5.5T–8.5T): Special dust-resistant design blocks debris while still promoting airflow.

• Rebuildable & Easy to Maintain
  Modular motor construction makes cleaning, inspection, and part replacement fast and simple.

---

Top-Tier Materials for Peak Performance

• High-Performance Stator Core

• 200°C Heat-Resistant Wire & Rotor

• High-Strength Bearings

• Gold-Plated Copper Solder Tabs
  All components are built to survive and thrive in extreme racing conditions.

---

Timing Setup & Recommendations

• Default Timing:

  • Stock: 40°

  • Modified: 30°

• Adjust with Care:

  • Increasing timing = higher RPM, but also increased heat.

  • Always ensure your ESC is properly programmed and use appropriate gearing.

  • Monitor motor temps using a temp gun, LCD programmer, or Hobbywing WiFi Link App.

If temperatures rise too high, reduce timing or adjust the Final Drive Ratio (FDR) and retest.

---

Race-Ready & Certified

Compliant with major racing organizations worldwide:

• IFMAR

• ROAR

• EFRA

• BRCA

Also certified by RoHS, CE, and FCC standards for environmental and electronic safety.

---

Key Features at a Glance

• High Precision Hall Sensor
• Balanced Rotor for Smooth Operation
• Fully Rebuildable Design
• Advanced Cooling Structure
• Adjustable Mechanical Timing
• Lightweight Design (132g–161g)
• Heat-Resistant Components (Rated to 200°C)
• Competition Legal Worldwide

---

Built for Champions

The XeRun V10 G3 is more than just a motor — it's a tool for victory. Whether you're running Stock or Modified classes, on-road or off-road, this motor is built to help you perform at your best when it matters most.

 

Specifications

Scale: 1/12^th
Brushed/Brushless: BL
Sensored/Sensorless: SD
Pole Count: 2

Relevant Parameters
KV Rating: 9450
LiPo Cells: 1S LIPO
No-load Current(A): 7.7A
Max. Power Output(W): 462
Amp at the Max. Power Out: 126

Size & Weight
O.D (mm): 35.9(1.41in)
Length (mm): 51.2(2.01in)
Shaft Diameter (mm): 3.17(0.125in)
Shaft Length (mm): 13.3(0.52in)
Weight:163(5.75oz)
Front Bearing:D9*D4*t4
Rear Bearing: D8*D3*t4

Other Parameters
Stock Rotor: 5-12.1
Timing: 20-50 Degrees(Adjustable)
Applications: Modified Class of 1/12^th On-road Racing