12V DC Water Solenoid Valve

Great for water irrigation Arduino projects

SKU: TA0349

RRP $29.95
Sold Out

Buy In Bulk & Save!
Buy 4 to 10: Pay $12.30 ea
Buy 11 to 20: Pay $11.07 ea
Buy 21 to 100: Pay $9.96 ea

Calculate Shipping

12V DC Water Solenoid Valve

Great for water irrigation Arduino projects

This is 12V DC Electric Water Solenoid Valve that is great for water irrigation, plant watering and other water based Arduino projects.

Working conditions Working voltage: DC12V 
Working pressure: 0.02~0.8 Mpa
Basic performance 
1. Flow performance: 0.5-15 L/min
2. Starting performance: 0.02~0.8MPa rated voltage can start at 100%;
3. Water pressure resistance performance: 5 minutes under 2MPa pressure without leakage or damage
4. Insulation resistance: Under DC500V voltage, the insulation resistance is greater than 100MΩ
5. Insulation grade: F grade
6. Durability: Under rated voltage, rated frequency, and normal temperature, one cycle is energized for 5S and power-off for 5S, and the water pressure is 0.02~0.8Mpa for a total of 50,000 cycles. After the test, the valve can work normally.
7. Salt spray resistance test performance: No corrosion within 48 hours.
Water inlet size 1/2 inch outer pipe thread
Outlet size Φ20mm
SKU TA0349
Barcode # 9351634025923
Brand iduino
Shipping Weight 0.1800kg
Shipping Width 0.200m
Shipping Height 0.040m
Shipping Length 0.200m
Shipping Cubic 0.001600000m3
Unit Of Measure ea

Be The First To Review This Product!

Help other Aus Electronics Direct users shop smarter by writing reviews for products you have purchased.

Write a product review

Others Also Bought

More From This Category